Squander tire recycling EPT/Tire crusher/Crumb rubber EPT
Squander tire recycling EPT is to crush squander tires into rubber powEPTin distinct measurements. The last rubber powEPTis with purity of 99.ninety nine%, can be utilized to make rubber tiles, rubber mat, asphalt, water-proof materials, filler of artificial grass.
The operating procedure of waste tire recycling crumb rubber EPT is:
waste tire—tire circle cutter—tire strip cutter—tire slice cutter—rims separator—rubber crusher—magnetic separator—fiber separator—rubber powder
Specification of waste tire recycling EPTs:
1. Tire circle cutter is used to reduce and open up the joint of tire’s side and leading.
|
Identify |
Motor EPT |
Fat |
Ability |
Tire specification |
|
Tire circle cutter |
4kw |
650kg |
40pcs/h |
650-1200mm (The two reinforced and nylon tires) |
two. Rims separator is utilised to different the metal rims around the tire to keep away from the hurt to the EPT.
|
Title |
Motor EPT |
Excess weight |
Potential |
|
Rims separator |
seven.5kw |
1300kg |
100pcs/h |
3. Tire strip cutter is used to reduce the tire cirlce into strips 5×8 cm .
|
Identify |
Motor EPT |
Excess weight |
Capability |
Reducing dimension |
|
Tire strip cutter |
4kw |
850kg |
2.5t/h |
5x8cm |
four. Tire slice cutter is utilised to lower the strips into little chunks about three.5 cubic centimeter.
|
Title |
Motor EPT |
Excess weight |
Capability |
Chopping dimension |
|
Tire slice cutter |
4kw |
800kg |
.8t/h |
3x5x8cm |
5. Principal rubber crusher is to crush the rubber blocks into powEPTin diverse dimensions with purity of 99.ninety nine%.
| Design | Potential | Drum diameter | Drum size | Front roll linear | Roll speed ratio | Max roller spacing | Motor EPT |
| XKP-350 | 3ton | 300mm | 500mm | 26.2m/min | 1:two.five | 8mm | 37kw |
| XKP-400 | 6ton | 400mm | 600mm | 34.5m/min | one:2.5 | 8mm | 45kw |
| XKP-450 | 8ton | 450mm | 760mm | 38.0m/min | 1:two.five | 8mm | 55kw/75kw |
| XKP-560 | 10ton | 560mm | 800mm | 38.6m/min | one:two.5 | 8mm | 75kw/90kw |
| XKP-560D | 20ton | 560mm | 1000mm | forty two.5m/min | 1:2.5 | 8mm | 132kw/160kw |
Positive aspects of our rubber crusher EPT:
1. Crusher roller velocity ratio: Ours is 1: 2.5, whilst the outdated kind roller pace ratio is 1: 1.38.
two. Roller construction: Our two rollers are the two grooved, which increase the friction and then boost the output, even though the previous kind is a single with groove, and the other is smooth.
3. Roller material: The roller is manufactured by Welding use resistant alloy supplies, 5Cr6MnMo. We can offer you three years warranty of the roller. Whilst the aged sorts EPT use forged iron to make the rollers, quite simple to break or crack in two .
four. EPT characteristic: Our EPT is strength preserving 1/3. For example, making 1T powder, our EPT electricity intake is only a hundred and fifty deg, although their electricity intake is about 250- 280 deg in creating 1T powder.
five. Bearing: Our EPT use rolling bearing, there are 8 pieces bearing inside, although the outdated EPT use the slide bearings ( bush) , which is not as good as ours.
For a lot more information, please really feel totally free to make contact with us whenever.
/Mobile: 15738242977
