waste tire processing line rubber powEPTmaking EPTry
The EPT tire recycling EPT will be controlled by the PLC, all the components will be process inside of EPTs, there is True ZERO Air pollution. one labor, 1 engineer can function all the EPTs, no want to run the EPTs, just handle the PLC. the EPTs can protect the EPTs, work the EPTs and keep the EPTs function smoothly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automatic management method, with computerized reversal management system in overload problem. Two-shaft tire crusher is EPTly made for old tires with low velocity and large torque to minimize sounds and EPT usage.
The blade of the shredEPTis manufactured of higher top quality steel and subjected to Bodycote warmth therapy to attain the ideal crushing performance.The shredEPTis simple to disassemble and adjust cutter blade and appropriate for tearing huge, further thick and tough resources.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire type,output and final item. The grinEPTcan process OTR tires,massive truck tires,car tires and so on at the speed of one-30tons whithin 1 hour.
| Product | Enter measurement | Output dimension | Cappacity | Motor | Blades amount | Dimensions | Bodyweight |
| TS-800 | 800mm | 50*50mm | one-2T/h | 2*22kw | 16pcs | 4*two.six*three.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | two*37kw | 20pcs | four.eight*2.8*3.5m | 14T |
| TS-1600 | 1600mm | 50-150mm | six-8T/h | two*45kw | sixteen-30pcs | five*two*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | seven-10T/h | two*55kw | twenty-24pcs | 5.six*2*three.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | 10-15T/h | two*75kw | 20-30pcs | 6*two.4*4m | 36T |
| TS-2400 | 2400mm | 100-200mm | 20-30T/h | two*110kw | 16-24pcs | seven.4*three.2*5.2m | 56T |
2.Rasper
EPT tire shredding method is created to generate up to 6 tons per hour of wire free rubber mulch.This program generates up to a ninety nine% wire free chip ranging in size among 12-25mm relying on the wanted size.After processing,the steel is taken off by our magnetic separation program.At this position,the wire free of charge rubber chips are prepared to be colored and utilized for landscaping mulch and the metal is all set to be baled and offered to smelters.
| Rasper | Motor | EPT | Capacity | Dimensions | Bodyweight | Slicing chamber | Last product |
| R45 | Siemens | 45KW | three hundred-500kg/H | 1.four*one.two*2.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | one.7*1.seven*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | 700-1T/H | two*2*four.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | 2.1*2.one*4.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | two*two.5*four.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | three-6T/H | six.two*two.1*3.6m | 12400kg | 697*1562mm | 10-30mm |
3.Granulator EPT
Squander Tire Recycling Rubber Granule Generating EPT is adopting physical recycling approach and is designed to grind the rubber mulch from the rasper into little granules as wonderful as one-6mm. The granules are screened and re-circulated right up until the sought after dimensions is reached. This Totally-Computerized Tyre Recycling Line running in standard temperature, no want to add any other chemicals, no air pollution to the environment. This is the very best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Ability | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Dimensions | one.8*1.six*two.4m | one.8*1.nine*two.4m | two.two*2.3*3m |
| Closing solution | one-6mm | one-6mm | one-6mm |
four.Miller
Rubber powEPTis the ultimate end result of ambient tire recycling.At this stage,crumb rubber is floor down into a cleanse powEPTform with nearly all metal and fiber taken off.Rubber powEPThas quite a few secondary employs from injection molding goods,coatings,roofing resources and various asphaltapplications.
Rubber powEPTis normally located in 40-74 microns(.40-.74mm) in dimension.This micron dimensions metarial has the advantage of getting included into new or eXiHu (West Lake) Dis.sting formulations for different polymers and completed merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input product | Heavy duty truck tyres to bicycle tyres | |||
| Enter size | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output size | shred to thirty-120 mesh rubber powder | |||
| Capacity | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a factory or a investing company?
A. We are a maker with thirty many years manufacturing knowledge in tire recycling EPT. We have export license, we can offer you you the manufacturing unit prices.
Q2. Can you ensure the ability as you described ?
A. Absolutely indeed,except that,we also provide 3-5years guarantee.
Q3, are you certain the closing rubber powEPTcan be completely clear out of wire steel or nylon ?
A. The last powEPTpurity can achieve 99.nine%. we have magnetic separator which can independent the wire metal from the rubber powder.
