Automatic tire recycling EPT/tyre shredEPTEPT

Tire debeader

The first step in tire recycling procession
Large responsibility body
Hooks and cross pulling die made of 45# steel, tempered and quenched
Equipped with protection body avoiding the hazards in the course of operating
Two sequence: Hydraulic a single and mechanic 1
Simple to function and modify spare areas (hooks and cross pulling die)
Tire cutter

Cutting tires into pieces just before shredding
Little tire pieces are less complicated to approach in shredder
Knives manufactured of YG-twenty metal, EPT making use of time
Hydraulic manage
A single clamping cylinEPTand one particular chopping cylinder
Outfitted with a roller system to approach big tires
Tire shredder

The substantial-capability shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for immediate dimension reduction of tires into cleanly minimize tire chips, dimensions 50×50 mm. Chopping shafts for the creation of more substantial tire chips are available large torque at lower speed cut even the strongest tires into pieces.
All building characteristics are made for constant procedure in orEPTto attain greatest throughput costs at lowest charges.
Really precise tolerances in between the chopping knives produce cleanly reduce tire chips at reduced strength use.
The cutting knives created of high quality alloy steel can be re-sharpened and reused which boosts the service life and lowers the functioning charges.
The complete cutting chamber is lined with tough put on plates.
Massive doorways enable for effortless entry into the reducing chamber.
Tire cracker

The shear among the two rollers will make tire chips into powders as properly loosen rubbers, steels and textiles
Roller human body manufactured of solid steel
Area of roller manufactured of alloy metal, welded when worn out
A single flat floor roller and one teethed roller, high throughput of powders
Base created of forged iron
Crisis quit when overload
Distance in between the two rollers can be altered.
Challenging equipment EPT
Equipped with screening EPT, magnetic separator and fiber separator, 99% purified rubbers will be received.
Finals: 8-30 mesh
Magnetic separator

Final Product(five-a hundred and twenty mesh tyre powder), As photograph:
The exact same time, Tyre powEPTis widely use in numerous market. It can make rubber tile, reclaimed rubber, vehicle part Ect other people.

2-Reclaimed rubber Creating Line From Tyre Powder:

one. Dynamic desulfurization tank (1 sets

Product Identify
Dynamic desulfurization tank
Design technical specs

2. Open up miXiHu (West Lake) Dis.ng mill (you require two-3 sets)

one. Diameter of roller: 450mm

2. Working length of roller: 1200mm

three. Speed of front roller: 24.26m/min

four. Friction ration of two rollers: 1: 1.27

five. Max hole: 15mm

6. Ability: twenty five-50kgs

seven. Wieght: 2000kgs

eight. Motor EPT: 55KW

nine. Dimension: 6150*2280*2000mm

three. Rubber refiner( 1 sets)

1. Front rolle diameter: 480mm (drum )

2. Rear roller diameter: 612mm (drum)

three. Doing work duration of roller: 800 mm

four. Entrance roller linear velocity: 22.97m/min

five. Velocity ratio of 2 rollers(entrance/rear): 1: 1.82

six. MAX Gap: 15mm

7. Motor EPT: 55KW

8. Dimension: 4700*2100*1480mm

Ultimate EPT(RECLAIMED EPT):

No	Name	product	quantity	EPT
EPT tire pre-processing , you will get lt 50*50MM rubber crumb
1	Solitary hook debeader	LS-1200	one	11 KW
2	EPT tyre cutter	WTC-120	1	five.five KW
3/four	EPT tyre shredder( with EPT tyre conveyor)	ZPS900	1	61.5 KW
Rubber powder processing: you will get three-8 MM rubber powder,at the identical time, independent the fiber and metal wire
5	Tyre crusher	XK560	1	seventy five KW
6	Large conveyor gear	BCL-8	two	two KW
seven	Tiny conveyor gear	BCL-3	1	1.1 KW
8	Large Magnet separator	BMS22	one	two.2 KW
9	Little Magnet separator	SMS-1	1	one.1 KW
ten	Big Shaking display	BSS-8	1	7.five KW
11	Little Shaking display	SSS-three	one	three KW
12	Fiber separator	FS110	1	eleven KW
13	Fine grinder	XMF420	1	32.four kw
14	Circle shaking monitor	DIA600	one	2.two kw